Home  Site map  Search

Hyperion Cap 232

by David
(Australia)

Hello, I have just bought the Hyperion Cap 232. I use to fly a trainer with only one servo for the ailerons but this model uses 1 on each wing... How do I make it so that one horizontal stick controls both servos?

Comments for
Hyperion Cap 232

Click here to add your own comments

Jul 30, 2008
 Multi-servo operation
by: Pete

Essentially there are 2 ways to do this. The first is to use what's called a 'Y' lead, or 'Y' harness. This is a lead with a single standard rx connector, but the other end splits off in to 2 separate leads each with their own female connector that the servos plug into.

The second way depends on what radio set you have - if it's computerised with a 'slave' funtion, then you can set the 5th or 6th channel to operate in conjunction with the normal aileron channel. One servo plugs in to the normal aileron rx slot, and the other into the 5th/6th channel slot. When the slave function is set up, both ailerons work in harmony.
You'll have to check the instruction manual for setting it up.

Click here to add your own comments

Join in and write your own page! It's easy to do. How?
Simply click here to return to Ask an RC Question